Light and Lighting Facts and Bits of Data - Miscellaneous, more technical!

Updated 3/3/2009.

Table of Contents - linked to the relevant sections

Bulb surface temperatures! How hot?
How many lumens in a watt of white light? updated 3/3/2009.
Heating of Fixtures by Incandescents vs. Compact Fluorescents

Bulb surface temperatures! How hot?

CAUTION: The following actual measurements were performed for a small number of readings after warmup times not timed where ambient air currents were not measured and may not have been constant in speed or direction.
ACTUAL TEMPERATURES MAY VARY SIGNIFICANTLY IN SITUATIONS OTHER THAN MY TESTING!

1. 120V Incandescent lamps, according to a Raytek brand non-contact thermometer, aimed at top of bulb from 2 mm away, hottest reading:

25W GE green party bulb A19, base down in free air, 26 C ambient:  70 C.

25  watt GE       clear A19, base down in free air, 26 C ambient: 144 C.
NOTE The clear one of these has the usual argon-nitrogen gas fill and the "party bulb" appears to have a vacuum.

40  watt GE       clear A19, base down in free air, 23 C ambient: 160 C.

40W  Sylvania softwhite A19, base down in free air, 23 C ambient: 155 C.

60W  Sylvania softwhite A19, base down in free air, 23 C ambient: 200 C.

100 watt Sylvania clear A19, base down in free air, 23 C ambient: 217 C.

100W GE Extra Soft White A19 base down in free air, 23 C ambient: 230 C.

100W GE Extra Soft White  base down in 20 cm globe, 23 C ambient: 274 C.
2. 120V incandescents, other readings with the Raytek non-contact thermometer:

100W Sylvania clear, base down free air 26 C ambient, side of bulb: 120 C.

(Raytek was 12-13 cm from bulb, "mental average" of several readings)
3. Compact fluorescents, readings with the Raytek non-contact thermometer:

13W PL/twintube, base down, free air, 26 C ambient, mid-bulb:         70 C.

13W PL/twintube, base down, free air, 26 C ambient, filament region: 107 C.

19W spiral, base down free air 26 C ambient, "mid-bulb" tubing:       84 C.

19W spiral, base down free air 26 C ambient, filament region:         98 C.

19W spiral, base down free air 26 C ambient, ballast housing:         49 C.

Heating of Fixtures by Incandescents vs. Compact Fluorescents

Temperature of the top of an 8-inch glass globe in 21-23 C ambient, as
measured with a Raytek non-contact thermometer after non-noted amounts
of time presumably sufficiently long for temperatures to stabilize:

Incandescents:

41 C with a 40 watt T10 (vacuum)
59 C with a 40 watt A19 (gas filled)
69 C with a 60 watt A19 (gas filled)
82 C with a 100 watt A19 (gas filled)

CFLs:

50 C with a 20 watt spiral
57 C with a 25 watt Philips SLS
70 C with a 23 watt Sylvania Dulux EL (probably from having its top closer
                                       to the top of the globe)
70 C with a 42 watt spiral, (presumably with the sides of the globe hotter
                            than with the 23 watt Sylvania Dulux EL)
It is to be noted that a 42 watt spiral compact fluorescent heated the globe slightly more than a 60 watt incandescent did. The explanation is that the incandescent produced a significant amount of infrared in the 700-2000 nm range that passed through the globe without heating it, while compact fluorescents produce little radiation other than visible light.

However, all radiation that does not escape the room/building that the lamp is operated in does become heat - although not necessarily at the lamp or the fixture.

How many lumens in a watt of white light?

The answer depends on what you call "white light". I give many options below for "white light" along with lumens per watt thereof. This would be the overall luminous efficacy of a hypothetical light source that is 100% efficient at converting input energy (typically electrical energy) to light of one of the following definitions, with zero input energy becoming anything else such as heat or radiation outside the relevant definition of "white light".

Equal power per unit wavelength from 377.5-762.5 nm - 189.6 lumens/watt
Equal power per unit wavelength from 380 to 760 nm - 192 lumens/watt
Equal power per unit wavelength from 400 to 700 nm - 243 lumens/watt

Equal power per unit wavelength from 422.5 to 692.5 nm,which has color of a 5270 K blackbody: 264.5 lumens/watt.

400-700 nm portions of blackbody radiation at a few color temperatures:

3000 K: 256 lumens/watt
3400 K: 262 lumens/watt
3600-4100 K: 263 lumens/watt, within 1 lumen/watt.
4500 K: 261 lumens/watt
5000 K: 258 lumens/watt
5500 K: 254 lumens/watt
6500 K: 246 lumens/watt

Trichromatic white / "white" achieved with 611 nm, 544 nm, and 450 nm:

4100K approximation - 397.5 lumens/watt
3500K approximation - 401.4 lumens/watt

Dichromatic "white":

4100K approximation with 450 nm blue and 573 nm greenish yellow: 478 lumens/watt.

3500K approximation with 450 nm blue and 576 nm yellow: 495 lumens/watt.

For some reference and in some cases some fine tuning and in some cases small discrepancies between use of the 1924 and 1988 photopic functions, look in the relevant discussions here. Some figures are by Vic Roberts, a frequent poster to the Usenet newsgroup sci.engr.lighting, and some are calculated by me.

UPDATE 3/11/2009:More figures for various forms / definitions of "white light" having color rendering index at least 77, ranging from 154 to 366 lumens for 1 watt of such "white light", can be found on page 105 and pages 112-116 of:

http://www.ecse.rpi.edu/homepages/shur/Solid%20State%20LightingTutorial_F2001.pdf

Even higher figures are stated for cases when CRI is low, especially on pages 114 and 116.

As for what kind of non-white / non-whitish light has maximum possible lumens per watt of radiated light, that would be monochromatic yellowish green light with a wavelength of 555-556 nm, and such light has 683 lumens per radiated watt.

UPDATE 12/21/2006: Lumens in a watt of "white LED light": The answer is 331, at least for a particular Nichia one of correlated color temp. of 5450 K. The LED here was a prototype noted in This LEDsMagazine news item mainly for being a high power one that achieved an overall luminous efficacy of 91.7 lm/W. I derived 331 luminous efficacy of lm/W efficacy of emitted light by dividing 91.7 lm/w by the 27.7% "wallplug efficiency" (electrical energy to light energy conversion efficiency) mentioned in that article.

White LEDs of lower color temperature will often have slightly higher luminous efficacy of emitted light, while white LEDs of higher color temperature will tend to have lower luminous efficacy of emitted light.


Written by Don Klipstein.

Copyright (C) 2006 Donald L. Klipstein (don@misty.com) - Please read my Copyright and authorship info.
Please read my Disclaimer.